Click here for Index

Solution to Tutorial 4

Given:

F = 1000 kg-mole/hr, xF = 0.20 (ethanol is MVC)
Feed is saturated liquid, thus q = 1.0
xD = 0.80, xB = 0.02 (maximum); R = 5/3

First, plot the equilibrium curve using the VLE data given. Note that you need to convert mole% ethanol into mole fraction. Then, apply the McCabe-Thiele method to find the number of theoretical (equilibrium) trays required for the separation.

 

Step 1:

Since R and xD are known (5/3, and 0.80 respectively), plot the ROL equation - it passes through xD on the 45o diagonal, i.e. the point (0.80, 0.80).

The intercept is 0.80 / (5/3+1) = 0.30.

Rectifying Operating Line

Step 2:

Plot the feed line using the q-line equation with q = 1.0 and xF = 0.20 - it passes through xF on the 45o diagonal.

Feed line or q-line

In this case, with q = 1.0, the q-line is a vertical line at xF = 0.20. Then locate its intersection with ROL.

Step 3:

Plot the SOL, by joining the point xB = 0.02 on the 45o diagonal to the intersection point between the ROL and q-line.

Step 4:

Draw triangles starting from xD (between ROL and equilibrium curve) down to xB (between SOL and equilibrium curve). The change from ROL to SOL occurs when xF is reached.

[ Back on Top ]

 

Solution for Example 4

From the graph plotted, number of triangles = 15. Thus, number of equilibrium stages required = 14 + 1 reboiler. Optimum feed plate location = stage #13.

The distillate and bottoms flowrates (D and B) can be obtained using material balances:

Total: F = D + B ; thus, B = 1000 - D

MVC: F xF = D xD + B xB

Substituting for B gives: ( 1000 ) ( 0.20 ) = ( D ) ( 0.80 ) + ( 1000 - D ) ( 0.02 )

Solving gives: D = 230.77 kg-mole/hr

And B = 769.23 kg-mole/hr

 

[ Back on Top ]


Analysis of Design:

It is noted that the Rectifying Section has more trays (12) than the Stripping Section (3, including the feed tray but excluding the reboiler). This is because the relative volatility of ethanol decreases sharply with increase in ethanol concentration.

Distillation Column with Trays

The relative volatility is very high initially, resulting in fewer trays being required for separation in the Stripping Section. As concentration of ethanol (mole fraction) increases, the relative volatility drops quickly, and becomes smaller as the concentration moves toward azeotropic concentration (at 0.894 mole fraction ethanol). The distance between the ROL and equilibrium curve becomes smaller, signifying a drop in concentration driving force for mass transfer, resulting in more trays being required in the Rectifying Section.

[ Back on Top ]

 

Tray design on Phase Diagram

 

[ Back on Top ]

 

Tray-to-Tray Concentration Changes

Tray-to-Tray Concentration profile for Ethanol

[ Back on Top ]